Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Power Door Lock Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.2 Door Lock Switch
2. Remove the door trim panel.
3. Disconnect electrical harness connector from switch.
Fig.3 Door Lock/Mirror Switch
4. From behind the door trim panel, gently pry the switch from the door trim panel.
INSTALLATION
1. Press the switch into place.
2. Connect the electrical harness connector to the switch.
3. Install the door trim panel.
4. Connect the battery negative cable.
