Liberty Sport 4WD L4-24L VIN 1 (2002) | Manifold Pressure/Vacuum Sensor | Specifications
The Manifold Absolute Pressure (MAP) sensor is mounted into the rear of the intake manifold. An O-ring is used to seal the sensor to the intake
manifold.
1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor O-ring seal for cuts or tears.
3. Position sensor into manifold.
4. Install MAP sensor mounting screws. Tighten screw to 3 Nm (25 in. lbs.) torque.
5. Connect electrical connector.
