Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Camshaft Position Sensor: Service and Repair
REMOVAL
Fig.9 CMP Location - 2.4L
The Camshaft Position Sensor (CMP) on this engine is bolted to the right-front side of the cylinder head. Sensor position (depth) is adjustable.
1. Disconnect electrical connector at CMP sensor.
2. Remove 2 sensor mounting bolts.
3. Remove sensor from cylinder head by sliding towards rear of engine.
INSTALLATION
The Camshaft Position Sensor (CMP) on this engine is bolted to the right-front side of the cylinder head. Sensor position (depth) is adjustable.
Fig.11 Upper Timing Belt Cover/Bolts - 2.4L
1. Remove plastic, upper timing belt cover (timing gear cover) by removing 3 bolts. Before attempting to remove cover, remove electrical connector