Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Differential Output Shaft Bearing: Service and Repair
Removal and Installation / Front Axle Shaft Bearings - 186FIA
REMOVAL
1. Remove half shaft.
2. Remove axle shaft for right side seal removal.
3. Remove shaft seal with Remover 7794-A and a slide hammer.
4. Remove shaft bearing with Remover 7794-A and a slide hammer (Fig. 29).
INSTALLATION
1. Install new shaft bearing with Installer 8805 and Handle C-4171.
2. Apply a light coat of lubricant on the lip of the shaft seal.
3. Install new shaft seal with an appropriate installer.
4. Install right axle shaft if removed.
5. Install half shaft.
