Liberty Sport 4WD L4-2.4L VIN 1 (2002)
15. Remove rear bearing from the pinion (Fig. 53) with Puller/Press C-293-PA and Adapters C-293-47.
16. Remove depth shims from the pinion shaft and record the shims thickness.
INSTALLATION
NOTE: A pinion depth shim/oil baffle is placed between the rear pinion bearing cone and pinion gear. If the ring and pinion gears are reused, the
original pinion depth shim/oil baffle can be used. Select the proper shim thickness if ring and pinion gear are replaced.
1. Apply Mopar Door Ease or equivalent lubricant to outside surface of pinion bearing cups.
2. Install rear pinion bearing cup (Fig. 54) with Installer C-4308 and Handle C-4171 and verify cup is seated.
