Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Tailgate Window Glass: Adjustments
ADJUSTMENTS
1. Verify that the flip-up glass is correctly centered in it's opening. Refer to Body and Frame / Specifications / Dimensions.
2. Confirm the flip-up glass to swing gate adjustment. Hold a straight edge flush against the glass as indicated, and record the gap/space between the
straight edge and the swing gate outer vertical panel.
NOTE: The flush specification for the flip-up glass to the swing gate outer panel is 0 mm - 2 mm over flush.
3. If the flip-up glass needs to be adjusted, loosen the two latch attaching fasteners (5) and move the latch for or aft in small increments until desired
measurement is achieved.
4. Tighten the flip-up glass latch fasteners to 12 N.m (9 ft.lbs.).
5. Verify correct flip-up glass closing efforts and operation.
