Patriot 2WD L4-2.0L (2008)
Left Side
1. Using a trim stick C-4755 or equivalent, separate the retaining clips (2) and remove the left D-pillar trim panel, if required.
Right Side
2. If the second row center seat belt lower anchor (1) is connected, access and unbuckle the lower anchor latch plate from the unique, keyed lower
anchor buckle (2). Use an ignition key or a small screwdriver to depress the small latch release button on the anchor buckle.
3. Separate the D-pillar trim retaining clips (3), using a trim stick C-4755 or equivalent.
4. Pull the seat belt (2) through the hole in the D-pillar trim (1) and remove.
Patriot
Left Side
