jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Body - Water Leaks At The Front/Rear Roof Area|Page 8837 > < Body - Water Leaks At The Front/Rear Roof Area|Page 8835
Page 7
background image

4.

Position a mirror behind the right strut tower and verify the grommet is properly seated against the bulkhead (Fig. 8)

5. Connect the drain tub to the sunroof drain spout.

6. Install the lower right side cowl trim panel. Refer to the detailed installation procedures available in DealerConnect > TechCONNECT under:

Service info > Body > Interior > Panel, Cowl Trim, Side > Installation.

REAR DRAIN TUBES:

1. Remove the right and left rear drain tubes. Refer to the detailed removal procedures available in DealerConnect> TechCONNECT under: Service

info > Body > Sunroof > Tube, Sunroof Drain> Removal.

2. Install the new rear sunroof drain tubes. Refer to the detailed installation procedures available in DealerConnect > TechCONNECT under: Service

info > Body > Sunroof > Tube, Sunroof Drain > installation.

3. Proceed to Step # 1 of the verification procedure.

ROOF SEAMS AND REAR BODY PLUGS:

1. Using a trim stick remove the right and left roof ditch moldings.

2. Remove all adhesive residue in the roof ditch with 3M General Purpose Adhesive Cleaner 08984 or Equivalent with a general purpose cloth.

Body - Water Leaks At The Front/Rear Roof Area|Page 8837 > < Body - Water Leaks At The Front/Rear Roof Area|Page 8835