Patriot 2WD L4-2.0L (2008)
9. Position the lift lever trim cap (2) and seat fully.
10. Position the inner side shields (2) and seat fully.
11. Install the seat cushion, See: Seat Cushion/Service and Repair/Removal and Replacement/Seat Cushion - Installation.
Passenger Seat
WARNING: Discard and replace the seat back bolts (2) with new bolts when servicing. Installing used bolts may result in the loosening of the
seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.
1. Install the seat back assembly (1) and install the new bolts (2).
2. Tighten the bolts to 40 Nm (30 ft. lbs.).
3. Position the side shields onto the seat adjuster tabs (1) and seat the clip (2) fully.
