Patriot 2WD L4-2.0L (2008)
7. Remove the screw (1) securing the wheel speed sensor routing bracket (2) to the brake flex hose bracket (5).
8. Remove the mounting screw (2) fastening the wheel speed sensor head (3) to the knuckle (4). Pull the sensor head out of the knuckle.
NOTE: In the following step, the routing clip can be easily removed without damaging it by rotating it (with entire sensor)
counterclockwise.
9. Remove the routing clip (1) securing wheel speed sensor cable to the knuckle (4). Remove the sensor from the vehicle.
