Patriot 2WD L4-2.0L (2008)
1. Clean the hub face (1) to remove any dirt or corrosion where the rotor mounts.
2. Install the brake rotor (3) over the studs on the hub and bearing (1).
CAUTION: Use care when installing the caliper onto the adapter bracket to avoid damaging the guide pin boot.
3. Rotate the disc brake caliper downward over the brake rotor and lower part of caliper adapter.
4. Install the disc brake caliper (2) lower guide pin bolt (1). Tighten the guide pin bolt to 43 Nm (32 ft. lbs.).
