jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Parking Brake Shoe|Removal|Page 5004 > < Parking Brake Shoe|Removal|Page 5002
Page 4
background image

11. Install the rear brake rotor (3) and install a couple wheel mounting nuts to hold it in place while a final adjustment is made.

NOTE: To find the adjuster wheel with the drum on position the hole (1) in the front of the rotor drum as follows:

-

Left side - 7 o'clock.

-

Right side - 5 o'clock.

NOTE: When adjusting the parking brake shoes with the drum-in hat rotor installed, rotating the adjuster wheel (2) upward will loosen the
adjustment. Rotating the adjuster wheel (2) downward will tighten the adjustment.

12. Remove the rubber plug from the hole (1) in the front of the rotor.
13. Utilizing the hole (1) in the front of the rotor, make a final adjustment of the shoes if necessary.
14. Reinstall the rubber plug.

Parking Brake Shoe|Removal|Page 5004 > < Parking Brake Shoe|Removal|Page 5002