Patriot 2WD L4-2.0L (2008)
Camshaft Bearing: Specifications
Camshaft Bearing Caps
CAUTION: Install the front intake and exhaust camshaft bearing cap last. Ensure that the dowels are seated and follow torque sequence or
damage to engine could result.
NOTE: If the front camshaft bearing cap is broken, the cylinder head MUST be replaced.
Install intake and exhaust camshaft bearing caps and slowly tighten bolts to 11 Nm (100 in. lbs.) in the sequence shown.
NOTE: Verify that the exhaust bearing shells are correctly installed, and the dowels are seated in the head, prior to tightening bolts.
Install the front intake and exhaust bearing cap and tighten bolts to 25 Nm (18 ft. lbs.) in the sequence shown.