Patriot 2WD L4-2.0L (2008)
Camshaft Gear/Sprocket: Service and Repair
Variable Valve Timing Assembly - Installation
INSTALLATION
CAUTION: Do not use an impact wrench to tighten camshaft sprocket bolts. Damage to the camshaft-to-sprocket locating dowel pin and
camshaft phaser may occur.
1. Install phaser (2) assembly on camshaft.
NOTE: Make sure the dowel is seated in the dowel hole and not in an oil feed hole. The dowel hole is larger than the 4 oil feed holes.
2. Install phaser retaining bolt and tighten while holding camshaft in place with a wrench (1).
3. Install camshaftsSee: Camshaft/Service and Repair/Removal and Replacement/Camshaft - Installation.
