Patriot 2WD L4-2.0L (2008)
8. Install oil pan drain plug (2) and tighten drain plug to 40 Nm (30 ft. lbs.).
9. Install new oil filter (1)See: Removal and Replacement/Installation.
10. Lower vehicle and fill crankcase with specified type and amount of engine oilSee: Engine Oil/Description and Operation.
11. Install oil fill cap.
12. Start engine and inspect for leaks.
13. Stop engine and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. Replace oil filter with a Mopar(R) or the equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING listed above.