Patriot 2WD L4-2.0L (2008)
4. Remove the three screws (1) that secure the wire lead bracket (2) and the blower motor (3) to the bottom of the HVAC housing (4) and remove the
blower motor and wire lead bracket.
5. Remove the two screws (5) that secure the blower motor resistor (6) to the bottom of the HVAC housing and remove the resistor.
6. Using needle nose pliers (1), disengage the two retaining tabs (2) that secure the evaporator temperature sensor (3) to the driver side of the HVAC
housing (4) and remove the sensor.
