Patriot 2WD L4-2.0L (2008)
Ignition Switch Lock Cylinder: Service and Repair
Housing-Lock Cylinder
Removal
REMOVAL
1. Access and remove the Steering Column Control Module (SCCM) (3) from the steering column (2). See: Accessories and Optional
Equipment/Steering Mounted Controls Communication Module/Service and Repair/Removal
2. If equipped with an automatic transaxle, disconnect the ignition shift interlock cable at the steering column. To do so, insert the ignition key into
the key cylinder and turn it to the ON position. Depress the tab on top of the interlock cable connector (2) and pull the cable out of the lock
cylinder housing (1).