Patriot 2WD L4-2.0L (2008)
8. Install the parking brake cable onto the lever on the parking brake shoe.
9. If equipped, position the wheel speed sensor (3) and install the screw (4) fastening the sensor to the trailing link (2). Tighten the mounting screw to
18 Nm (13 ft. lbs.).
10. If equipped, position the wheel speed sensor (3) and install the routing clip (1) fastening the sensor to the trailing link (2).
11. Install the hub and bearing, then install the brake rotor onto the wheel studs. See: Wheel Bearing/Service and Repair/Rear Hub / Bearing -
Installation
