Patriot 2WD L4-2.0L (2008)
5. Distribute 1/2 the amount of grease provided in seal boot service package (DO NOT USE ANY OTHER TYPE OF GREASE) into outer CV joint
assembly housing. Put the remaining amount into the sealing boot (4).
6. Install outer CV joint sealing boot to interconnecting shaft clamp evenly on sealing boot.
7. Clamp sealing boot onto interconnecting shaft (2) using crimper, Clamp C-4975-A and the following procedure. Place Clamp C-4975-A (1) over
bridge of clamp (3).
8. Tighten nut on Clamp C-4975-A until jaws on tool are closed completely together (2), face to face.
