jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Quarter Window Glass|Removal|Page 9944 > < Quarter Window Glass|Removal|Page 9942
Page 4
background image

4. Allow end of adhesive bead (1) to run out parallel to the start of the bead and smooth ends flush.

5. Lift quarter glass into place in the center of the quarter glass opening and install over the alignment tabs and pin (2).
6. Carefully lay down the quarter glass and press on.

NOTE: Patriot installation similar to the Compass installation above.

CAUTION: It is no longer possible to move the quarter glass after installation. The quarter glass should never be pressed into place by more
than one person, because the quarter glass can break if pressed simultaneously on both sides.

CAUTION: Roll down the left and right front door glass and open the rear glass slider (if available) before installing quarter glass to avoid
pressurizing the passenger compartment if a door is slammed before urethane is cured. Water leaks can result.

Quarter Window Glass|Removal|Page 9944 > < Quarter Window Glass|Removal|Page 9942