Patriot 2WD L4-2.4L (2009)
1. Install strap and bolt to rear floor pan. Tighten bolt to 8 Nm (71 in. lbs.).
2. Install strap and bolt to muffler. Tighten bolt to 8 Nm (71 in. lbs.).
3. Connect battery negative cable.
RADIO NOISE SUPPRESSION CAPACITOR
1. Install capacitor and bolt.
2. Connect electrical harness connector to capacitor.
3. Connect battery negative cable.
STRUT BRACKET TO BODY GROUND STRAP
1. Install strap to frame rail.
CAUTION: Ensure that ground strap does not come in contact with brake hose. Damage to brake hose can result.
2. Install strap and bolt to strut. Tighten bolt to 12 Nm (106 in. lbs.).
