jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Steering Mounted Controls Communication Module > < Remote Radio Switches - Removal
Page 1
background image

Remote Switch: Service and Repair
Remote Radio Switches - Installation

INSTALLATION

WARNING: On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or

instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag
deployment and possible personal injury.

1. Install remote radio switch to the steering wheel.
2. Install steering wheel rear cover.
3. Connect the wire harness to the remote radio switch.
4. Install the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation.
5. Install the driver side airbag See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Air Bag -

Installation.

6. Connect the battery negative cable.

Steering Mounted Controls Communication Module > < Remote Radio Switches - Removal