Patriot 2WD L4-2.4L (2009)
Hood Latch Release Cable: Service and Repair
Hood Release Cable - Installation
INSTALLATION
1. Install the cable (1) and route through the cowl panel (3).
2. Install the push pin fastener (2).
3. Install the handle (3) and install the screws (2).
4. Install the cowl trim panel, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel - Removal
5. Connect the hood latch cable (1 and 2) to the hood latch (3).
