Patriot 2WD L4-2.4L (2009)
6. If necessary, install the mounting pins (1) in the ICU (2) and tighten to 11 Nm (97 in. lbs.).
7. If the mounting bracket (3) needs to be installed on the ICU (1), install the mounting pins in the ICU as necessary and tighten to 11 Nm (97 in.
lbs.). Insert the mounting pins into the grommets mounted in the bracket, then install the single mounting bolt (2). Tighten the mounting bolt to 11
Nm (97 in. lbs.).
8. Install the ICU in the vehicle. See: Removal and Replacement/Integrated Control Unit (ICU) - Installation - INSTALLATION)
Integrated Control Unit (ICU) - Disassembly
DISASSEMBLY
