Patriot 2WD L4-2.4L (2009)
8. Compress and remove the hold-down spring (2) retaining the front shoe to the support plate.
9. Remove both brake shoes from the wheel cylinder.
10. Remove both shoes and remaining parts as an assembly (3) through the opening between the wheel cylinder (1) and support plate hub and bearing.
11. Place the shoe assembly outboard-side-up on a flat surface.
12. Remove the adjuster spring (2) from the leading shoe (3) and the lever pawl (1).
13. Remove the lever pawl (1) from the pivot on the rear shoe (5).
