Patriot 2WD L4-2.4L (2009)
Thermostat: Service and Repair
Engine Coolant Thermostat - Installation
Primary Thermostat
PRIMARY THERMOSTAT - GAS ENGINE
1. Position thermostat into the water plenum, aligning air bleed with the location notch on inlet housing (2).
2. Install inlet housing (2) onto coolant adapter. Tighten bolts to 9 Nm (79 in. lbs.).
3. Connect coolant hose (1).
4. Install air filter housing.
5. Fill cooling system See: Service and Repair.
Secondary Thermostat
SECONDARY THERMOSTAT - GAS ENGINE
1. Position the thermostat into the cylinder head.
