Patriot 2WD L4-2.4L (2009)
10. Install right engine mount bracket (1). Tighten bolts to 50 Nm (37 ft. lbs.).
11. Install accessory drive belt upper idler pulley (1). Tighten bolt to 48 Nm (35 ft. lbs.).
12. Install engine mount adapter (2) and tighten bolts (3) to 68 Nm (50 ft. lbs.).
13. Install engine mount through bolt (4) and tighten to 88 Nm (65 ft. lbs.).
14. Remove jack from under engine.
