Patriot 2WD L4-2.4L (2009)
3. Install the recirculation door actuator (1) onto the right side of the air inlet housing (2). If necessary, rotate the actuator slightly to align the splines
of the actuator output shaft (3) with those on the recirculation door pivot shaft adapter (4).
4. Install the air inlet housing (3) onto the HVAC housing (1) See: Removal and Replacement/HVAC Housing - Installation.
5. Install the HVAC housing assembly See: Removal and Replacement/HVAC Housing - Installation.
HVAC Housing
HOUSING-HVAC
NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.
1. If removed, install the seal (4) onto the evaporator tube tapping block (5).
NOTE: Make sure that the foam insulator is properly positioned in the HVAC housing.