jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Door Switch > < Dome Lamp Bulb - Removal|Page 7628
Page 1
background image

Dome Lamp Bulb: Service and Repair
Reading Lamp Bulb - Installation

BULB

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the

lamp, the socket or the lamp wiring.

NOTE: This lamp also houses a switch for the power operated sunroof on vehicles that are so equipped.

1. With the reading lamp lens (1) in the open position, align the ends of the bulb (3) with the two bulb holders within the lamp housing (2).
2. Carefully press the bulb firmly and evenly into the bulb holders until it snaps into place.
3. Reinstall the lamp into the headliner.   See: Service and Repair/Reading Lamp - Installation.
4. Reconnect the battery negative cable.

Door Switch > < Dome Lamp Bulb - Removal|Page 7628