jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Headlamp Unit Bulb - Removal|Page 7669 > < Hazard Warning Switch - Description|Page 7663
Page 1
background image

Headlamp Bulb: Service and Repair
Headlamp Unit Bulb - Removal

BULB - HEADLAMP - DOMESTIC

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb

life will result.

1. Disconnect and isolate the battery negative cable.
2. Disconnect the engine compartment wire harness connector from the connector receptacle integral to the headlamp bulb base (3) on the back of the

headlamp unit housing (1).

3. Using the tabs on each side of the connector receptacle, firmly grasp the bulb base and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the bulb and base straight out from the keyed opening in the headlamp reflector (2).

Headlamp Unit Bulb - Removal|Page 7669 > < Hazard Warning Switch - Description|Page 7663