Patriot 2WD L4-2.4L (2009)
5. Tip module out and remove from bracket.
Powertrain Control Module - Installation
INSTALLATION
USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL
IDENTIFICATION NUMBER (VIN) AND THE VEHICLES ORIGINAL MILEAGE. IF THIS STEP IS NOT DONE, A DIAGNOSTIC
TROUBLE CODE (DTC) MAY BE SET.
1. Tip module into bracket.
2. Install three mounting bolts and tighten to 9 Nm (80 in. lbs.) torque.
