Patriot 2WD L4-2.4L (2009)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler - Installation
INSTALLATION
1. Install the cooler tubes in the clips (3) on the side of the frame rail.
2. Install the fluid return hose (1) on the power steering fluid cooler lines (4). Install the hose clamps (2) on the hoses past the bead formed into the
end of the cooler tube and secure in place.
3. Install the right front splash shield See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Splash Shield - Installation
4. Install tire and wheel assembly See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
5. Lower the vehicle.
6. Fill and bleed the power steering system. See: Service and Repair/Power Steering System Bleeding
7. Check for leaks.
