Patriot 2WD L4-2.4L (2009)
6. Install the return hose (1) at the return tube (2).
7. Lower the vehicle.
8. Install the front fascia. See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia -
Installation
9. Install the windshield washer reservoir. See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer
Reservoir - Installation
10. Install the power steering fluid reservoir. See: Power Steering Fluid Reservoir/Service and Repair/Reservoir, Power Steering Pump - Installation
11. Install the coolant recovery bottle. See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Coolant Recovery
Bottle - Installation
12. Fill and bleed the power steering system. See: Service and Repair/Power Steering System Bleeding
13. Check for leaks.
14. Install the engine appearance cover.
Supply Hose
GAS ENGINE
1. Slide hose clamps (2) onto both ends of the power steering fluid supply hose (1) far enough to clear the fittings on the reservoir and pump once the
hose is installed.
2. Place the pump end of the supply hose (1) onto the pump (3) supply fitting. Expand the hose clamp (2) and slide it over the hose and pump supply
fitting. Secure the clamp once it is past the bead formed into the fluid supply fitting.
