jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Steering Column Shroud - Removal|Page 5068 > < Steering Column Control Module - Removal|Page 5062
Page 1
background image

Steering Column Cover: Service and Repair
Steering Column Shroud - Removal

Upper

REMOVAL

1. Position the column tilt at the full-downward position.
2. Remove the two screws (4) attaching the upper shroud (1) to the lower shroud (2). After removing the screws, unclip the shrouds from each other

by applying hand pressure along the seams where the shrouds connect on the sides, then remove the upper shroud.

Lower

REMOVAL

Special Tools

1. Remove the screws (2) from the bottom of the steering column opening cover (1).
2. Using Trim Stick C-4755 separate the steering column opening cover (1) and remove.

Steering Column Shroud - Removal|Page 5068 > < Steering Column Control Module - Removal|Page 5062