Patriot 2WD L4-2.4L (2009)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Pad - Removal
REMOVAL
CAUTION: Brake fluid will damage painted surfaces. If brake fluid is spilled on any painted surfaces, wash it off immediately with water.
NOTE: Before proceeding, See: Brakes and Traction Control/Service Precautions/Technician Safety Information See: Brakes and Traction
Control/Service Precautions/Vehicle Damage Warnings .
1. Remove engine cover.
2. Disconnect and isolate the battery negative cable from its post on the battery.
3. Remove the air cleaner cover (3) and the air intake hose (2) to the hose (1) leading down the back of the engine.
4. Remove the PCM bracket mounting nut (1) to upper shock tower stud (if equipped).
5. Remove the PCM bracket mounting bolt (2) to lower shock tower (if equipped).
6. Reposition the PCM and bracket (4) out of the way (if equipped).
7. Remove the master cylinder See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and
Replacement/Brake Master Cylinder - Removal.
8. Remove the left front brake tube from the clip located on the left body rail.
