Patriot 2WD L4-2.4L (2009)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Pad - Installation
INSTALLATION
1. Carefully install the clutch pedal bracket assembly (1) in the vehicle lining up the bracket with the clutch mounting studs on the dash panel.
2. Install the four nuts (4) attaching the clutch pedal bracket assembly (1) to the dash panel.
3. Tighten the four clutch pedal and bracket assembly mounting nuts (4) to 23 Nm (17 ft. lbs.).
CAUTION: Brake fluid will damage painted surfaces. If brake fluid is spilled on any painted surfaces, wash it off immediately with water.
