Patriot 2WD L4-2.4L (2009)
Front Door Window Motor: Service and Repair
Window Regulator Motor - Removal
REMOVAL
1. Move the window to the full UP position, if possible.
2. Disconnect and isolate the battery negative cable.
3. Remove the front door module. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel Bolster - Removal.
4. Disconnect electrical harness connector from motor.
5. Remove window regulator.
6. With regulator on bench, remove four screws retaining the motor to the regulator and remove motor.
