Patriot 2WD L4-2.4L (2009)
1. Apply two new spacers (2) to the liftgate frame.
2. Install the lower spacers to the liftgate horizontal flange.
NOTE: Typical primer installation shown.
3. Clean and dry area of glass (2) to be re-glued with a suitable glass preparation solvent and rag.
4. Apply primer to gluing surface at liftgate glass seal.
5. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
6. Allow primer to air dry for at least 10 minutes.
