jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Headliner - Removal|Page 7021 > < Headliner - Removal|Page 7019
Page 1
background image

Headliner: Service and Repair
Headliner - Installation

INSTALLATION

1. Position the headliner into the vehicle and connect the washer hose at the front (1).

2. Tuck the headliner up over the remaining interior trim and connect the rear washer hose, if equipped.
3. Connect the dome light (1) electrical connector and position the headliner (4) up onto the rear header (2).
4. Install the push pin fasteners (3).

5. If equipped with a sunroof seat the trim ring fasteners (3) fully.

Headliner - Removal|Page 7021 > < Headliner - Removal|Page 7019