Patriot 4WD L4-2.4L (2009)
Traction Control Switch: Service and Repair
Electronic Stability Program (ESP) Switch - Removal
REMOVAL
NOTE: The ESP Off switch is integral to the accessory switch bank and cannot be serviced separately.
1. Disconnect and isolate the negative battery cable.
2. Remove the center bezel from the instrument panel and place it on a work bench See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Instrument Panel Bezel - Removal.
3. Remove the screws that secure the accessory switch bank to the back of the center bezel and remove the accessory switch bank.