Patriot 4WD L4-2.4L (2009)
2. Inspect the water pump inlet tube O-rings for damage before installing the tube in the coolant adapter. Replace O-ring as necessary.
3. Lubricate the O-rings with soapy water.
4. Position the coolant adapter on the water pump inlet tube and the cylinder head.
5. Install the coolant adapter mounting bolts. Tighten the bolts to 18 Nm (159 in. lbs.).
6. Connect the front coolant hose (1).
7. Connect the two rear coolant hoses (1).
8. Connect the radiator hose (3).
9. Install the air filter housing See: Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body -
Installation
10. Fill the cooling system See: Service and Repair.