Patriot 4WD L4-2.4L (2009)
NOTE: It is only necessary to position the windshield washer reservoir, power steering fluid reservoir and engine coolant reservoir out of the
way. Draining of the washer fluid, power steering fluid and engine coolant is not required.
10. Remove the windshield washer reservoir, power steering reservoir and the engine coolant reservoir and position them out of the way.
11. Remove the nut (1) that secures the refrigerant line retaining bracket (2) to the right front strut tower (5).
12. On RHD models, disengage the retainers that secure the power brake booster vacuum supply hose to the dash panel and position the vacuum line
out of the way.
13. Remove the bolt (3) that secures the A/C liquid and suction line assembly (4) to the A/C evaporator (6).
14. Disconnect the A/C liquid and suction line assembly from the A/C evaporator and remove and discard the dual-plane seals.
15. Install plugs in, or tape over the opened refrigerant line fittings and the evaporator ports.
16. Remove the A/C liquid and suction line assembly from the engine compartment.
