Patriot 4WD L4-2.4L (2009)
CAUTION: The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.
6. Tighten the bolts in a mandatory torque criss - cross pattern sequence to 7.5 Nm (65 in. lbs.).
7. Connect electrical connector (1) to throttle body (2).
8. Install clean air hose and tighten clamps to 4 Nm (35 in. lbs.).
9. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
10. Use a scan tool and clear all fault codes then perform the ETC RELEARN function.