jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Ignition Lock Cylinder - Removal|Page 3462 > < Ignition Lock Cylinder - Removal|Page 3460
Page 2
background image

8. Install and tighten the screw (2) that secures the mounting tab on the back of the right multi-function switch (1) to the mounting bracket on the

clockspring (3).

9. Install steering column opening cover, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Steering

Column Opening Cover - Installation.

10. Install upper (1) and lower (2) steering column shrouds,See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service

and Repair/Steering Column Shroud - Installation.

Ignition Lock Cylinder - Removal|Page 3462 > < Ignition Lock Cylinder - Removal|Page 3460