Patriot 4WD L4-2.4L (2009)
3. Remove steering column opening cover, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
4. Remove the screw (2) that secures the right multi-function switch (1) to the mounting bracket integral to the right side of the clockspring (3) on the
steering column.
5. Slide the switch away from the clockspring far enough to disengage the slide tab on the bottom of the switch housing from the channel formation
in the mounting bracket. Position the multi-function switch (1) aside.
6. Position steering column to the full down position.
7. Position ignition key to the RUN position.
8. Remove screw (1) fastening the SKREEM/WCM (2) to the lock cylinder housing (3).
9. Unhook the SKREEM/WCM (2) retainer fingers from the lock cylinder housing (3) and position the SKREEM/WCM (2) back on the lock
cylinder housing (3).