Patriot 4WD L4-2.4L (2009)
2. Remove the screw (4) that secures the second row outboard seat belt lower anchor to the rear floor panel (3).
3. Remove the upper trim (2) from the inside of the C-pillar (6). See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar
Trim/C-Pillar Trim Panel-Removal.
4. Pull the seat belt lower anchor through the seat belt opening in the upper C-pillar trim.
5. Remove the screw (1) that secures the seat belt turning loop to the upper C-pillar.
6. Remove the seat belt turning loop from the upper C-pillar.
7. Move the trim from the front of the quarter inner panel far enough to access the seat belt retractor (7). See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Luggage Compartment Trim/Quarter Trim Panel - Removal.
8. Remove the screw (4) that secures the retractor (1) to the lower C-pillar.
9. Remove the second row outboard seat belt and retractor from the lower C-pillar as a unit.
