Patriot 4WD L4-2.4L (2009)
5. Route the second row center seat belt latch plate and lower anchor (5) through the seat belt opening in the upper D-pillar trim (4).
6. Reinstall the upper trim onto the inside of the right D-pillar. .
7. Access and buckle the second row center seat belt lower anchor latch plate (1) to the unique, keyed lower anchor buckle (2).
Second Row - Outboard
SECOND ROW - OUTBOARD
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar(R) Parts Catalog.
NOTE: All seat belt retractors except the driver side front retractor include a switchable automatic locking mechanism. See: Description and
Operation/Seat Belt Retractor - Description .
1. Position the second row seat belt and retractor (7) to the lower inner C-pillar (6).
2. Engage the locator tab on the back of the retractor into the slot in the lower C-pillar.
3. Install and tighten the screw (5) that secures the retractor to the lower C-pillar. Tighten the screw to 40 Nm (30 ft. lbs.).