Patriot 4WD L4-2.4L (2009)
Brake Fluid Level Sensor/Switch: Service and Repair
Brake Fluid Level Switch - Removal
REMOVAL
NOTE: Before proceeding, See: Brakes and Traction Control/Service Precautions/Technician Safety Information See: Brakes and Traction
Control/Service Precautions/Vehicle Damage Warnings .
1. Remove the wiring harness connector (1) from the brake fluid level switch (2) in the master cylinder brake fluid reservoir.
2. Push together the retaining tabs (1) holding the brake fluid level switch in place in the brake fluid reservoir (2).
3. Pull the brake fluid level switch out the right side of the reservoir.
