jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Power Window Switch - Removal|Page 1022 > < Driver Power Window Switch C1 (Left/Right Front Door) 6 Way|Page 1019

Patriot 4WD L4-2.4L (2009)

Page 1
background image

Power Window Switch: Service and Repair
Power Window Switch - Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the front door bolster. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door

Trim Panel Bolster - Removal.

3. Disconnect the electrical harness connectors.
4. With the bolster on the bench, gently pry in on the tabs of the mirror switch and push through the front of the cover and remove.

Power Window Switch - Removal|Page 1022 > < Driver Power Window Switch C1 (Left/Right Front Door) 6 Way|Page 1019