Patriot 4WD L4-2.4L (2009)
Battery Tray: Service and Repair
Battery Tray - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. On diesel engine equipped vehicles disconnect the vacuum connector (3) and electrical connector (1) from the diesel vacuum valve (2).
3. On diesel engine equipped vehicles lift the diesel vacuum valve bracket (1) up disengaging the mounting tabs from the receptacles (2) in the
battery tray.
4. Remove the battery See: Service and Repair/Removal and Replacement/Battery - Removal.
5. Remove the four bolts (1) and one nut (2) securing the battery tray (3) to the left frame rail (4).